Brother DCP1518

User Check

- Rotate the paper 180 degrees in the paper tray.
- Check that the thickness of the paper is within the standard.
- Check that there is no label stuck in the paper feed path.

Step	Cause	Remedy
1	Top cover is not closed	Close the top cover.
2	Foreign object in the rear of the machine	Remove the foreign object. Check for labels stuck on the side or bottom of parts.
3	Eject actuator caught in sections of the machine	Reattach the eject actuator.
4	Connection failure of the eject sensor PCB harness	Reconnect the eject sensor PCB harness.
5	Eject sensor failure	Replace the eject sensor PCB ASSY.
6	Connection failure of the paper feed/paper printing position sensor PCB harness	Reconnect the paper feed/paper printing position sensor PCB harness.
7	Paper feed/paper printing position sensor PCB failure	Replace the paper feed/paper printing position sensor PCB ASSY.
8	Develop joint link failure	Replace the develop joint link.
9	Fuser unit failure	Replace the fuser unit.
10	Main PCB failure	Replace the main PCB ASSY.