Brother DCP1518

User Check

- Check that the paper is set in the paper tray correctly.
- Check that there is not too much paper set in the paper tray.
- Flip over the paper in the paper tray or rotate the paper 180 degrees.
- Check that the thickness of the paper is within the standard.
- Check that the size of the paper is within the standard.
- Flip through the paper and reset it in the paper tray.

Step	Cause	Remedy
1	Foreign object inside the machine	Remove the foreign object.
2	Gears around the plate up plate coming off	Reattach gears around the plate up plate.
3	Attachment failure of the motor drive belt	Reattach the motor drive belt.
4	Attachment failure of the laser shutter arm	Reattach the laser shutter arm.
5	Connection failure of the main motor harness	Reconnect the main motor harness.
6	Connection failure of the motor encoder PCB flat cable	Reconnect the motor encoder PCB flat cable.
7	Connection failure of the pick-up solenoid harness	Reconnect the pick-up solenoid harness.
8	Motor drive belt failure	Replace the motor drive belt.
9	Motor encoder PCB failure	Replace the motor encoder PCB ASSY.
10	Low voltage power supply PCB failure	Replace the low voltage power supply PCB unit.
11	Laser unit failure	Replace the laser unit.
12	Main PCB failure	Replace the main PCB ASSY.