Brother DCP-T700W
Troubleshooting. 7.1 Document cannot be fed
User Check
- Check if the document is loaded correctly all the way inside the ADF document support and if "ADF READY" is displayed on the LCD.
- Check if the amount of document inside the ADF document support is not fewer than the specified amount.
Step | Cause | Solution |
---|---|---|
1 | Foreign materials near the document pick-up roller | Remove foreign materials. |
2 | Document pick-up roller stained | Clean the Document pick-up roller. |
3 | Document detection actuator out of place | Set the Document detection actuator into place. |
4 | ADF motor harness connection failure | Reconnect the ADF motor harness. |
5 | Document detection sensor harness connection failure | Reconnect the Document detection sensor harness. |
6 | Document pick-up roller worn out | Replace the Document separate roller ASSY. |
7 | Document detection sensor defective | Replace the Document detection sensor PCB. |
8 | ADF motor defective | Replace the ADF unit. |
9 | Main PCB defective | Replace the Main PCB ASSY. |