Brother DCP-T700W
Troubleshooting. 2.1 Recording paper is not fed from paper tray
User Check
- Check if the recording paper is loaded correctly in the Paper tray.
- Check if the number of recording paper loaded in the paper tray is within specified volume.
- Try reversing the recording paper in the Paper tray, or rotating direction of the paper for 180 degrees.
- Check if the recording paper's thickness is within specifications.
- Shuffle recording papers thoroughly and then reload them in the Paper tray.
- Clean the Paper pull-in roller.
Step | Cause | Solution |
---|---|---|
1 | Paper pull-in roller not mounted in place | Reattach the Paper pull-in roller. |
2 | CR encoder strip stained | Clean the CR encoder strip. |
3 | PF encoder disk stained | Clean the PF encoder disk. |
4 | Paper feed motor harness connection failure | Reconnect the Paper feed motor harness. |
5 | Maintenance unit not properly attach | Reattach the Maintenance unit. |
6 | Paper pull-in roller worn out | Replace the Paper pull-in roller. |
7 | CR encoder strip defective | Replace the CR encoder strip. |
8 | PF encoder disk defective | Replace the PF encoder disk. |
9 | Paper feed motor defective | Replace the Paper feed motor. |
10 | Maintenance unit defective | Replace the Maintenance unit. |
11 | Main PCB defective | Replace the Main PCB ASSY. |