Brother DCP-L8450CDW
Troubleshooting. 2.3. No paper feeding from MP tray
User Check
- Check if the paper is loaded all the way into the MP tray.
- Check that too much paper is not loaded in the MP tray.
- Check if the machine is used with the MP tray support and MP flap are in closed state.
- Check if the thickness of the paper is 60 to 163 g/m2.
- Check whether the paper tray 1 or T2 paper tray unit is specified for the paper feeding tray.
- Fan the stack of paper well and reinsert the papers into the MP tray.
- Clean the MP paper pick-up roller.
- Check whether the paper tray 1 is closed correctly.
Step | Cause | Remedy |
---|---|---|
1 | MP paper empty acutuator A ASSY/B coming off | Re-assemble the MP paper empty acutuator A ASSY/B. |
2 | Connection failure of the main motor harness | Reconnect the main motor harness. |
3 | MP roller holder ASSY installation failure | Check the installation of the MP roller holder ASSY and install it correctly. |
4 | Connection failure of the MP paper empty/registration front sensor PCB harness | Reconnect the MP paper empty/ registration front sensor PCB harness. |
5 | MP paper pick-up roller worn out | Replace the PF kit MP. |
6 | MP paper empty acutuator A ASSY/B failure | Replace the MP paper empty acutuator A ASSY/B. |
7 | MP paper empty/registration front sensor failure | Replace the MP paper empty/registration front sensor PCB ASSY. |
8 | Main motor failure | Replace the process drive unit. |
9 | Paper feed related gear damaged | Replace the main drive unit. |
10 | Fuser unit damaged | Replace the fuser unit. |
11 | Main PCB failure | Replace the main PCB ASSY. |