Brother DCP-L6600DW
Troubleshooting. 2.7 Paper is fed at an angle
User Check
• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust each paper guide according to each paper size.
• Check that the thickness of the paper is 60 to 120 g/m2 for paper tray 1 to 5, and 60 to 200 g/m2 for MP tray.
• Check that there is not too much paper set in each paper tray.
• Check that each type of paper is appropriate.
• Clean each paper pick up roller.
• Check that the green envelope lever is not lowered on only one side.
• Replace the drum unit.
• Replace the toner cartridge.
| Step | Cause | Remedy |
|---|---|---|
| 1 | Tray guide coming off on the machine side | Reattach the tray guide on the machine side. Refer to the figure below. |
| 2 | One-side abrasion of the paper pick up rollers | Replace the PF kit. |
| 3 | Damaged gears in the paper feeding system | Replace the main frame L ASSY. |