Brother DCP-J152W

User Check

- Check if the recording paper is loaded correctly in the Paper tray.
- Adjust the paper guide to match the recording paper size.
- Check if the recording paper loaded is smaller than the specified size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the Paper tray.
- Clean the Paper feed roller.
- Check that the Jam clear cover is securely closed.
- Check if there is no curling or bending in the recording paper.

Step	Cause	Solution
1	Foreign materials in the recording paper feeding path	Remove foreign materials.
2	Jam clear cover not mounted in place	Reattach the Jam clear cover.
3	CR guide rail not properly attached	Reattach the CR guide rail.
4	Platen not mounted in place	Reattach the Platen ASSY.
5	Paper feeding path parts out of place	Set the paper feeding path parts into place.
6	Jam clear cover defective	Replace the Jam clear cover.
7	Paper tray defective	Replace the Paper tray.
8	Paper width sensor defective	Replace the Carriage PCB.
9	Platen defective	Replace the Platen ASSY.
10	Paper feed motor defective	Replace the Paper feed motor.
11	Registration sensor defective	Replace the Registration sensor PCB ASSY.
12	Main PCB defective	Replace the Main PCB ASSY.