Brother DCP-J152W
Troubleshooting. 2.3 Recording paper feeding at an angle
User Check
- Check if the recording paper is loaded correctly in the Paper tray.
- Adjust the paper tray guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the Paper tray.
- Clean the Paper pull-in roller.
| Step | Cause | Solution |
|---|---|---|
| 1 | Paper pull-in roller not mounted in place | Reattach the Paper pull-in roller. |
| 2 | Paper feeding path parts out of place | Set the paper feeding path parts into place. |
| 3 | Main PCB defective | Replace the Main PCB ASSY. |