PrintCopy.info service

Zebra GK420t

Error Codes List page 2

  • Code: 07
  • Display: Flashing Red
  • Description: The media is out. The printhead is open.
  • Remedy: • Follow the instructions for Loading Media in users manual, and then press the Feed button to resume printing. • Close the top cover and then press the Feed button to resume printing.
  • Code: 08
  • Display: Double Flashing Green
  • Description: The printer is paused.
  • Remedy: • Press the Feed button to resume printing.
  • Code: 09
  • Display: Flashing Amber
  • Description: The printhead is over temperature.
  • Remedy: • Printing will stop until the printhead cools to an acceptable printing temperature. When it does, the printer will automatically resume operation.
  • Code: 10
  • Display: Alternately Flashing Green and Red
  • Description: FLASH memory is not programmed.
  • Remedy: • Return the printer to an authorized reseller.
  • Code: 11
  • Display: Flashing Red, Red and Green
  • Description: The printhead or motor has had a critical failure.
  • Remedy: • Return the printer to an authorized reseller.
  • Code: 12
  • Display:
  • Description: No print on the label.
  • Remedy: • The media may not be direct thermal media when printing without ribbon (i.e. thermal transfer). See Determining Thermal Media Types on page 24. • For thermal transfer printers, the media may not be outside wound or approved for use in the printer. See the following ribbon test procedures: Ribbon Test with Adhesive on page 27 and the Ribbon Scratch Test on page 28 in the users manual. • Is the media loaded correctly? Follow the instructions for Loading Roll Media in the users manual. For printing using transfer ribbon, see Loading Transfer Ribbon in the users manual.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us