Zebra 140

Error Codes List page 1

  • Code: 01
  • Display:
  • Description: All LEDs light, but nothing displays on LCD and printer will not operate.
  • Causes: Main Logic Board or EPROM faulty.
  • Remedy: Insure EPROMs properly installed or Replace the Main Logic Board.
  • Code: 02
  • Display:
  • Description: Buffer Empty LED turns OFF after 15 sec. but all other LEDs stay ON
  • Causes: Main Logic Board Dynamic RAM faulty.
  • Remedy: Replace Main Logic Board
  • Code: 03
  • Display:
  • Description: ONAll LEDs flash ON and OFF
  • Causes: No significant amount of DRAM tested good
  • Remedy: Replace the main logic board,
  • Code: 04
  • Display:
  • Description: Take Label LED Flashing
  • Causes: Printer Misconfigured for Peel- Off Mode
  • Remedy: If Peel-Off is desired, check Take Label Sensor
  • Code: 05
  • Display:
  • Description: Printer locks up while running Power On Self Test
  • Causes: Main logic Board failure
  • Remedy: Replace Main Logic Board
  • Code: 06
  • Description:
  • Causes: A ROM checksum is incorrect.
  • Remedy: Turn the printer OFF and then ON. If the fault reoccurs, replace the main logic board
Error Code
Service Mode, Troubleshooting
Parts Catalog
Downloads Files
New Register Forgot Password?
Send message to us