Causes: This code appears after 6 failed attempts.
Remedy: Restart the transmission at a later time.
Code: 03
Description: Stopped by operator
Causes: Communication stopped by the operator by pressing the STOP key.
Remedy:
Code: 04
Description: Programmed number invalid
Causes: Invalid programmed single-key or quickdial number (Example: a delayed transmission has been programmed with a single key and this key has been deleted).
Remedy: Check the validity of the programmed number and/or the single-key associated to the programmed number.
Code: 05
Description: Scanning fault
Causes: An error has occurred at the location of the document to be transmitted (Example: the sheet is jammed).
Remedy: Check the ADF module.
Code: 06
Description: Printer not available
Causes: An error has occurred on the printer (Example: out of paper, paper jam or cover open). In the case of a reception, this incident code only appears if the RECEPTION WITHOUT PAPER parameter is set to WITHOUT PAPER.
Remedy: Check the printer.
Code: 07
Description: Disconnect
Causes: The communication has been cut (bad connection).