Description: Database abnormality: Database is not operating normally. (Language management database)
Causes:
Remedy: Setting Delete the journal file: [5] + [C] + [START] → 4. Initialize DB - > 3. Language DB If the recovery is still not completed, reinstall the master data and application program. "11.2.1 Master data/ System ROM"
Code: F130
Description: Invalid MAC address
Causes: SYS board
Remedy: SYS board • Board check
Code: F131
Description: Error due to damage to filtering setting file
Causes: HDD
Remedy: Setting 1. Check the bad sector of the HDD (08-9072). If the result is “NG”, replace the HDD. Notes: It may take more than 30 minutes to finish the checking. 2. Perform [3] + [C] + [POWER] → [3], and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] → [3] is performed.
Code: F140
Description: ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted
Causes: SYS board Main memory
Remedy: SYS board • Connector check • Board check Main memory • Check the installation • Main memory check
Code: F200
Description: Data Overwrite option (GP-1070) disabled
Causes: SYS board
Remedy: Firmware • Perform firmware installation (all firmware: OS, HDD, SYS, PFC Firmware, Engine Main Firmware, and Scanner Firmware) with the USB media. Remarks: When the function of the Data Overwrite option (GP- 1070) is deleted from the equipment, the service call “F200” occurs
Code: F350
Description: SLG board abnormality
Causes: SLG board
Remedy: SLG board 1. Check if the conductor pattern on the SLG board is short circuited or open circuited. 2. If there is no problem found in the check (1) above, check the combination of the firmware version of the system ROM, engine ROM and scanner ROM. Reinstall the scanner ROM firmware. 3. If an error occurs after step (2) above has been performed, replace the SLG board.