Description: 3rd drawer tray abnormality: The 3rd drawer tray-up motor is not rotating or the 3rd drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 3rd drawer)
Description: 4th drawer tray abnormality: The 4th drawer tray-up motor is not rotating or the 4th drawer tray is not moving normally. (the case that paper can be fed from any drawer except the 4th drawer)
Description: LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally. (the case that paper can be fed from any drawer except the LCF)
Description: LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally. (the case that paper can be fed from any drawer except the LCF)
Causes: LCF end fence motor LCF end fence home position sensor LCF end fence stop position sensor PFC board
Remedy: LCF end fence motor • Motor check (Perform the output check: 03-256) • Connector check • Harness check LCF end fence home position sensor • Sensor check (Perform the input check: 03-[COPY]ON/[9]/[E]) • Connector check • Harness check LCF end fence stop position sensor • Sensor check (Perform the input check: 03-[SCAN]ON/[1]/[E]) • Connector check • Harness check PFC board • Connector check (CN507) • Board check
Code: C1C0
Description: Option LCF tray-up motor abnormality: The option LCF tray-up motor is not moving normally
Remedy: Option LCF hook Check that the optional LCF is hooked by two positions on the equipment.If it is not hooked securely, perform its height adjustment. Gaps between the equipment and the optional LCF Check that the gaps between the equipment and the optional LCF on the upper and lower positions are even. If the gap on the upper position is wider than that on the lower position, perform height adjustment of the optional LCF. Option LCF tray-up motor • Motor check (Perform the output check: 03-270) • Connector check • Harness check Option LCF tray-up sensor • Sensor check (Perform the input check: 03-[SCAN]ON/[5]/[H]) • Connector check • Harness check LCF board • Connector check • Board check PFC board • Connector check (CN503) • Harness check • Board check
Code: C260
Description: Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON.
Causes: Lens unit SLG board Exposure lamp Supply harness
Remedy: 1 Is the exposure lamp lit? (Output check: 03-267) Yes It is lit. 2 No It is not lit. 3 2 Shading correction plate 1. Check if there is any scratch or stain on the shading correction plate. Mirror 1. Check if the mirror is tilted. - Check that the lens is reflected in the mirror looking at carriage-1 from the upper position. - Check that the mirror is secured at the leaf spring. Exposure lamp 1. Check if the exposure lamp is correctly lit. 2. Check if the harness is connected properly to the exposure lamp connector. 3. When the carriage is driven, check if the harness interferes with it or parts are caught in it. CCD board / Lens unit 1. Check if the connector of the CCD board is connected properly. 2. Check if the CCD board is installed properly. (Check that the lens unit is not tilted or the screw is securely tighten.) SLG board 1. Check if the connector of the SLG board is connected properly. 2. Check if the mounted parts on the SLG board are damaged or abnormal. 3. Check if 10 V is output from the power supply for CCD. 3 SLG board 1. Check if the supply cable is connected properly to the connector. 2. Check if the mounted parts on the SLG board are damaged or abnormal. Inverter board 1. Check if the harness of the exposure lamp is connected to the inverter board properly. 2. Check if the supply harness to the inverter board is connected properly. 3. Check if the mounted parts on the inverter board are damaged or abnormal. Exposure lamp 1. Check if the harness of the exposure lamp is connected to the inverter board properly. 2. Check if the exposure lamp is scratched or damaged. Supply harness 1. Check if wiring of the supply harness (CN127) is abnormal. 2. Check if the harness is scratched or open circuited.