PrintCopy.info service

Toshiba e-Studio 2500c

Error Codes List page 43

  • Code: F140
  • Description: ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted
  • Causes: SYS board Main memory
  • Remedy: SYS board • Connector check • Board check Main memory • Check the installation • Main memory check
  • Code: F200
  • Description: Data Overwrite option (GP-1070) disabled
  • Causes:
  • Remedy: Setting Perform firmware installation (all firmware: OS, HDD, SYS, PFC Firmware, Engine Main Firmware, and Scanner Firmware) with the USB media. * When the function of the Data Overwrite option (GP- 1070) is deleted from the equipment, the service call “F200” occurs. Perform 08-3840 to install the Data Overwrite Enabler (GP- 1070). * If F200 occurs while High (Åg3Åh) is set for the security level (08-8911), it cannot be released by installing the firmware using the USB media. Install the Data Overwrite Enabler (GP-1070) by 08-384.
  • Code: F400
  • Description: SYS board cooling fan abnormality
  • Causes:
  • Remedy: SYS board cooling fan Check if the fan is rotating properly. If not, check if any foreign object is adhered. SYS board Check the connector (CN126) and relay connector.
  • Code: F500
  • Description: HD partition damage
  • Causes:
  • Remedy: Setting . Diagnose the file system with [5] + [C] + [POWER] - 1. . Check F/S, and then recover the problem partition with [5] + [C] + [POWER] - 2. Recovery F/S. . If it is not recovered, reinstall the software after the HDD format.
  • Code: F510
  • Description: Application start error
  • Causes:
  • Remedy: Setting 1. Reboot. 2. If it has still not recovered, reinstall the HDD software. 3. If it still persists after step 2, perform [3] + [C] + [POWER] - 3, and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] - 3 is performed.
  • Code: F520
  • Description: Operating system start error
  • Causes:
  • Remedy: Setting 1. Reboot. 2. If it has still not recovered, reinstall the HDD software. 3. If it still persists after step 2, perform [3] + [C] + [POWER] - 3, and then reinstall the HDD software. Notes: User data will be deleted when [3] + [C] + [POWER] - 3 is performed.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us