Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Remedy:
Code: J02
Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Remedy:
Code: J43
Description: Paper Jam in the Registration Sensor or Paper Path Sensor.
Remedy:
Code: J44
Description: Paper Jam in the Paper Exit / ADU Paper Jam Sensor.
Remedy:
Code: J71
Description: Original was longer than 78.7 in (2m). (Information Code 031 or 032 is printed on the Transaction Journal instead.)
Remedy:
Code: J72
Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.)