Description: RTN/PIN is received on the sending side. RTN/PIN is received on the receiving side.
Remedy: This may happen in some cases of bad line condition. Ask the remote party to transmit again.
Code: E0
Description: A printer error occurred during a reception, and the machine is shifted into memory reception mode. However, there was not enough residual memory
Remedy: Remove the cause of the printer error, then ask the remote party to transmit again.
Code: E6
Description: An error relating to the printer has occurred.
Remedy: Confirm details of the error using the error code and correct the error. Then ask the remote party to transmit again.
Code: F0
Description: The communication ended because of a WDT due to an overrun of the software.
Remedy: Attempt the communication again. If the error occurs frequently, perform a memory clear (except user area.)
Code: F1
Description: The communication ended because of an overrun of the software due to hard-ware noises.
Remedy: Attempt the communication again. If the error occurs frequently, perform a memory clear (except user area.)