Description: A file error occurred due to a directory error.
Remedy: Perform a full memory clear. If the error recurs, replace the main PBA.
Code: 22 ... 24
Description: The fuser failed to operate normally.
Remedy: 1 Is the cable firmly connected with the following paths? • Fuser - LVPS (CN2) • LVPS (CN1) - Main PBA (CN17) Insert the cable firmly. 2 Is the cable from the fuser firmly connected to the main PBA (CN18, 20)? Insert the cable firmly. 3 Does the connector pin come off or is the cable broken? Replace the cable. 4 If no problem is found in the steps above, the fuser, LVPS, or main PBA may be defective. Replace the fuser, the LVPS and then the main PBA.
Code: 30
Description: The [STOP] key was pressed during the communication, and the communication was stopped.
Remedy: Attempt the transmission or reception again.
Code: 32
Description: The set number of document pages did not match the actual pages transmitted.
Remedy: Check the actual document count.
Code: 33
Description: The polling password did not match, or no polling document existed.
Remedy: Check the polling password or check if there is a polling document on the remote party’s side, and attempt the polling reception again.
Code: 41
Description: The polygon motor in the LSU failed to operate.
Remedy: 1 Is the cables firmly connected between the LSU and the main PBA (CN3, 8)? Insert the cables firmly. 2 Does the connector pin come off or is the cable broken? Replace the cable. 3 When no problem is found in the steps above, the LSU or main PBA may be defective. Replace the LSU and then the main PBA.