Description: ADF I/F error: Communication error has occurred between the ADF and the scanner
Remedy:
Code: C56
Description: PFC board I/F error: Communication error has occurred between the PFC board and the equipment.
Remedy:
Code: C94
Description: Firmware update error: error message appears when either the following Main boards installed e- STUDIO182/212/242. The Main board for e-STUDIO165/205 which STUDIO167/207/237 firmware installed The Main board for e-STUDIO165/167/205/207/237 which e-STUDIO e-STUDIO182/212/242 firmware installed
Remedy:
Code: C97
Description: High-voltage transformer abnormality: Leakage the main charger detected.
Remedy: (1) the main charger installed securely? (2) Check the spring high-voltage supply contact point deformed. (3) Check the needle electrode broken the main charger grid deformed. (4) Check any foreign matters on the needle electrode the main charger grid. (5) the transfer/separation charger installed securely? (6) Check the transfer/separation charger wire broken unhooked. (7) Check any foreign matter on the transfer/separation charger wire.
Code: C99
Description: PFC microcomputer abnormality
Remedy:
Code: CA1
Description: Polygonal motor abnormality: The polygonal motor not rotating normally
Remedy: Is the polygonal motor rotating? NO 1) Check if the connector of the harness is disconnected between MAIN board (CN24) and the laser optical unit. 2) Check if the harness is open circuited and the connector pin is disconnected. 3) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 4) Replace the laser optical unit. 5) Replace the MAIN board. YES 1) Check if the conductor pattern on the MAIN board is short circuited or open circuited. 2) Replace the MAIN board.