PrintCopy.info service

Sharp AL11PK

Error Codes List page 2

  • Code: E7-15
  • Description: Copy lamp OFF trouble
  • Causes: Copy lamp or copy lamp drive circuit (invertor PWB) trouble Copy lamp disconnection
  • Code: H2-00
  • Description: Thermistor open detection
  • Causes: The fusing thermistor is open.
  • Code: H3-00
  • Description: Heat roller abnormally high temperature
  • Causes: The fusing temperature rises above 240°C.
  • Code: H4-00
  • Description: Heat roller abnormally low temperature
  • Causes: The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.
  • Code: L1-00
  • Description: Feed is not completed within the specified time.
  • Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn OFF. Or when the mirror base is fed for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn OFF.
  • Code: L3-00
  • Description: Return is not completed within the specified time.
  • Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON.Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn ON.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us