Samsung SLC1860FW

• Code: A3-3311, A3-3312
• Description: Actuator Sensor Failure #A3-3311: Call for service if the problem persists.
  Actuator Sensor Failure #A3-3312: Call for service if the problem persists.
• Causes: The outer temperature sensor is defective.
• Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again.
  2) Enter the tech mode. Check the temperature sensor output.
  3) If the sensor is defective, replace it.
  4) If the temperature sensor is OK, replace the main board.

• Code: A3-3320
• Description: Not proper room temperature. Change room temperature.
• Causes: The value of the outer temperature sensor is out of normal area.
• Remedy: 1) Check if the machine is installed in the proper area.
  2) If the temperature sensor is defective, replace it.

• Code: C2-2110, C2-3110
• Description: Prepare new yellow toner cartridge.
  Prepare new magenta toner cartridge.
  Prepare new cyan toner cartridge.
  Prepare new black toner cartridge.
• Causes: The remaining toner cartridge is less than 10%
• Remedy: 1) Print the supply information report. Check the life remaining of the toner cartridge.
  2) If its life is at the end, turn the machine off and replace the toner cartridge with new one.

• Code: C2-2120, C2-2150, C2-3120
• Description: Replace with new yellow toner cartridge.
  Replace with new magenta toner cartridge.
  Replace with new cyan toner cartridge.
  Replace with new black toner cartridge.
• Causes: The toner cartridge is at the end of its life.
• Remedy: 1) Print the supply information report. Check the life remaining of the toner cartridge.
  2) If its life is at the end, turn the machine off and replace the toner cartridge with new one.

• Code: C2-2320, C2-2410, C2-3320
• Description: Yellow Toner Failure: #C2-2320. Install yellow toner cartridge again.
  Install yellow toner cartridge.
  Magenta Toner Failure: #C2-3320. Install magenta toner cartridge again.
  Install magenta toner cartridge.
  Cyan Toner Failure: #C2-4320. Install cyan toner cartridge again.
  Install cyan toner cartridge.
  Black Toner Failure: #C2-5320. Install black toner cartridge again.
  Install black toner cartridge.
• Causes: The toner cartridge is not installed or the CRUM has some problem.
• Remedy: 1) Check if the toner cartridge is installed properly. Turn the machine off then on.
  2) If the error message is not disappear, remove the toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
  3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
  4) If the problem persists, replace the toner cartridge with new one.

• Code: C2-2512, C2-3512
• Description: Yellow toner cartridge is not compatible. Check user's guide.
  Magenta toner cartridge is not compatible. Check user's guide.
  Cyan toner cartridge is not compatible. Check user's guide.
  Black toner cartridge is not compatible. Check user's guide.
• Causes: Toner cartridge is not compatible.
• Remedy: 1) Print the supply information report. Check information of the toner cartridge.
  2) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.