PrintCopy.info service

Samsung ProXpress M4075FR

Error Codes List page 6

  • Code: C9-1122
  • Display: Replace pickup roller / Replace with new tray 2 pickup roller
  • Description: Tray2 pick up roller is worn out.
  • Remedy: 1) Remove the Tray 2 cassette. 2) See the bottom of the SCF Unit. 3) Pull the small tap down, then release the pick up roller(JC97-02259A).
  • Code: C9-1125
  • Display: Replace retard roller / Replace with new tray 2 retard roller
  • Description: Tray2 reverse roller is worn out.
  • Remedy: 1) Remove the Tray 2 cassette. 2) Open the cassette cover. 3) Pull the small tap down, then release the reverse roller(JC97-02259A).
  • Code: H1-1210
  • Display: Paper jam in Tray2.
  • Description: A paper jam was detected in the feed area of the tray2.
  • Remedy: 1) Remove the Tray2 cassette. 2) Find and remove the jammed paper. 3) If the problem persists, check the following. • Check if the pick up/forward/reverse roller(JC97-02259A) is contaminated or worn out. • Check if the feed sensor connector is connected properly. • If the feed sensor(0604-001325) is defective replace it.
  • Code: H1-1220
  • Display: Tray 2 Door Open. Close it
  • Description: Optional cassette is not installed properly
  • Remedy: 1) Remove and reinstall the Tray2 cassette. 2) Check the cassette detection sensor. • Check if the connection between sensor and main board is OK. Reconnect the harness. • If the sensor(JC34-00001A) is defective, replace it. 3) If the problem persists, replace the SCF main board(JC92-02636A).
  • Code: H1-1230
  • Display: Error: #H1-1230 / Input System Failure: #H1-1230. Check tray 2 connection
  • Description: Communication error has occurred.
  • Remedy: 1) Turn the machine off then on. 2) If the problem persists, turn the machine off. 3) Remove the SCF right cover. (Refer to 3.3.23.1) 4) Check if the interface connector is connected to the SCF main board. If the interface connector is defective, replace it. 5) If the problem persists, replace the SCF main board.(JC92-02636A)
  • Code: H1-1240
  • Display: Tray2 Not Install
  • Description: Optional cassette is not installed properly.
  • Remedy: 1) Remove and reinstall the Tray2 cassette. 2) Check the cassette detection sensor. • Check if the connection between sensor and main board is OK. Reconnect the harness. • If the sensor(JC34-00001A) is defective, replace it. 3) If the problem persists, replace the SCF main board(JC92-02636A).
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us