Description: Machine fails to disconnect the Tool Carriage from the Head Carriage.
Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
Remedy: Check the mechanical Backlash or loose with the Tool Carriage part. Connection Part Replacement Limit Position Initialize
Code: 0107
Description: Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done. Linear Encoder Setup is ended before it is completed.
Remedy: Carry out Linear Encoder Setup in service menu
Code: 0109
Description: Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value.
Causes: Wiper Motor error Defect of Wiper Unit Defect of Wiper Sensor Cut-line or short-circuit of cable and Flexible cable
Remedy: Wiper Motor Replacement Wiper Unit Replacement Wiper Sensor Replacement Cable and Flexible Cable Replacement
Code: 0110
Description: Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
Causes: Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.
Remedy: Confirm whether Encoder Scale is between the slit of Encoder Module in a whole width of the machine. Check cable connection between Linear Encoder Board and Head Board Confirm connection between Belt and Carriage Linear Encoder replacement Scan Motor replacement Main Board replacement
Code: 0111
Description: This error occurs when the machine performs the Auto Crop Mark Detection without peforming the Tool / Crop-Cut Adjustment.
Causes: Crop-Cut Adjustment has not been performed in service menu
Remedy: Carry out Crop-Cut Adjustment in service menu
Code: 0112
Description: It is not possible to communicate with the Cartridge IC driver.
Causes: Cartridge IC driver has a problem (not working). The communication wire of Cartridge IC driver cable has short circuited or cut-line.