Description: Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done. Linear Encoder Setup is ended before it is completed.
Remedy: Carry out Linear Encoder Setup in service menu.
Code: 0109
Description: Wiper unit does not work correctly.
Causes: Wiper Unit hits the Tool Carriage Wiper Motor error Defect of Wiper Unit Defect of Wiper Sensor Cut-line or short-circuit of cable and Flexible cable
Remedy: Move the Head Carriages on the bed not to hit the Wiper Unit. Wiper Motor Replacement Wiper Unit Replacement Wiper Sensor Replacement Cable and Flexible Cable Replacement
Code: 0110
Description: Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
Causes: Read error of Linear Encoder Read error of Encoder on Scan Motor side Belt is not fi xed to Head Carriage fi rmly.
Remedy: Confi rm whether Encoder Scale is in the slit of Encoder Module in a whole width of the machine. Check cable connection between Linear Encoder Board and Main Board. Confi rm connection between Belt and Tool Carriage. Linear Encoder replacement Scan Motor replacement Servo Board replacement Main Board replacement
Code: 0111
Description: This error occurs when the machine performs the Auto Crop Mark Detection before performing Crop- Cut Adjustment.
Causes: Crop-Cut Adjustment in the Service menu has not been performed.
Remedy: Carry out Crop-Cut Adjustment in service menu.
Code: 0112
Description: Communication error with Cartridge IC driver
Causes: Cartridge IC driver is broken. Cartridge IC driver cable has short circuited or cut-line.
Remedy: Ink cartridge IC sensor replacement
Code: 0130
Description: There is a problem with Thermistor for Print Heater.
Causes: Thermistor cable has short circuited or cutline. Thermistor has a problem.
Remedy: Check cable connection around Thermistor. Thermistor replacement