PrintCopy.info service

Roland SJ745EX SolJet proIIV

Error Codes List page 1

  • Code: 0002
  • Description: Sub CPU Communication Error
    Disorder of communication with Sub CPU
  • Causes: Sub Board does not work correctly. Sub CPU does not work correctly. There is a bad connection between Main Board and Sub Board.
  • Remedy: 1) Check Cable Connection between Main Board and Servo Board 2) Servo Board Replacement 3) Main Board Replacement
  • Code: 0003
  • Description: DIPSW model setting error
    A setup about the model of DIPSW is set up in an unsuitable combination.
  • Causes: DIPSW setup error DIPSW defect Main Board defect
  • Remedy: 1) Check the DIPSW setup 2) Replacement the Main Board
  • Code: 0101
  • Description: Limit Position Error
    Limit Position Initialize has not been done.
  • Causes: Limit Position Initialize has not been done.
  • Remedy: 1) Carry out Limit Position Initialize.
  • Code: 0102
  • Description: Head Lock Sensor Error
    Even though the machine carries out the regular movement, the output of the Head Lock Sensor does not reach the expected value.
  • Causes: Head Lock Sensor does not work correctly or is broken.
  • Remedy: 1) Head Lock Sensor Replacement 2) Check the mechanical Backlash or loose with the scanning axes.
  • Code: 0103
  • Description: Limit Sensor Error
    Even though the machine carries out the regular movement, the output of the Limit Sensor does not reach the expected value.
  • Causes: Limit Sensor does not work correctly or is broken.
  • Remedy: 1) Limit Sensor Replacement 2) Check the mechanical Backlash or loose with the scanning axes.
  • Code: 0104
  • Description: Cap Unit Protection Error
    Even though the machine carries out the regular movement, the output of Cap Sensor does not reach the expected value.
  • Causes: Disorder of Cap Motor Fault of Cap Unit Fault of Cap Sensor Cut-line or short-circuit of Cable and Flexible Cable
  • Remedy: 1) Cap Motor Replacement 2) Cap Unit Replacement 3) Cap Sensor Replacement 4) Cable and Flexible Cable Replacement
  • Code: 0105
  • Description: Tool Carriage Connection Error
    Machine fails to connect the Tool Carriage to the Head Carriage.
  • Causes: Fault of Tool Carriage Connection Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
  • Remedy: 1) Check the mechanical Backlash or loose with the Tool Carriage part. 2) Lock Position Adjustment 3) Limit Position and Cut Down Position Initialize 4) Limit Sensor Replacement
  • Code: 0106
  • Description: Tool Carriage Disconnection Error
    Machine fails to disconnect the Tool Carriage from the Head Carriage.
  • Causes: Disorder of Cap Motor Loose of Connection Part Fault of the Limit Position Initialize value Limit Sensor does not work correctly or is broken.
  • Remedy: 1) Check the mechanical Backlash or loose with the Tool Carriage part. 2) Lock Position Adjustment 3) Limit Position and Cut Down Position Initialize 4) Limit Sensor Replacement
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us