Causes: • If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated. • If the Ink sensor does not detect ink in the Squeegee unit within 80 seconds after the Drum idling has started.
Remedy: Ink pack set sensor OFF & 5 seconds later ON.
Code: C42
Description: Replace Master Roll
Causes: • If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation.
Remedy: Master making unit set SW OFF &ON. • Replace the depleted Master roll with a new one.
Code: C43
Description: Empty Disposal Box
Causes: • If the Master full detection sensor does not detect the Master compress plate during the master compressing process.
Remedy: Master removal set switch OFF & 5 seconds later ON. • Empty the disposal box.
Code: C44
Description: Add Paper
Causes: • If the light path of the Paper detection sensor is open.
Remedy: Paper detection sensor ON. • Add paper on the Paper feed tray.
Code: C49
Description: Close Master Removal Unit
Causes: • If the actuator of the Master disposal unit set switch is not depressed.
Remedy: Close the Master removal unit.
Code: C51
Description: Insert Card into Key/Card Counter
Causes: • If an operator card is not set in the Key/Card counter.