Causes: 026 The Battery voltage is too low when the power is turned ON. (Readjust the machine clock after replacing the battery.)
Remedy: Replace the battery.
Code: T89
Description: Master compression plate error
Causes: 350 The Clamp unit is in the lowered position and the Master compression plate is not in the HP position when the Print drum starts its movement. (This is to protect the machine parts.)
Remedy: Turn the power OFF and ON.
Code: T91
Description: Operation panel EEPROM error
Causes: 013 Time data from RTC is incorrect 969 Panel EEPROM write error. 976 Panel EEPROM check-sum error. 977 Panel EEPROM verify error.
Remedy: Press the <RESET> Key.
Code: T92
Description: Drum EEPROM write error
Causes: 570 EEPROM on the Drum PCB is being accessed while the Print drum is in releasing action from the machine.
Remedy: Press the <RESET> Key.
Code: T93
Description: NET-C hardware error
Causes: 932 No reply from the NET-D network interface card while accessing to the network interface card. 933 No response from NET-D for 90 seconds during NET-D initialization.
Remedy: Turn the power OFF and ON.
Code: T93
Description: NET-D hardware error
Causes: 932 No reply from the NET-D network interface card while accessing to the network interface card. 933 No response from NET-D for 90 seconds during NET-D initialization.