Description: Delete All error 1: HDD An error is detected while the all data of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (B735).
Causes: Not installed Data Overwrite Security Unit (SD card). Defective HDD.
Remedy: 1. Install the Data Overwrite Security Unit (B735). 2. Replace the HDD.
Code: 875
Description: Delete All error 2: Data area An error is detected while the all data of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (B735).
Causes: The logical format for HDD fails.
Remedy: 1. Turn the main switch off/on and try the operation again.
Code: 876
Description: Log Data Error
Causes: 001 Log Data Error 1 [D] • An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating. 1. Initialize the HDD with SP5832-004. Log Data Error 2 002 [D] • The DESS module is not installed when the DESS module is set to ON. 1. Replace the DESS module. 2. Turn off the DESS module function. Log Data Error 3 003 [D] • Invalid encryption key log due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting. Log Data Error 4 004 [D] • Unusual encryption function log due to the defective NVRAM data 1. Initialize the HDD with SP5832-004. Log Data Error 5 005 [D] • NVRAM or HDD, which is used in other machine, is installed. 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. Log Data Error 99 099 [D] • Other than above causes 1. Ask your supervisor.
Remedy:
Code: 877
Description: HDD Data Overwrite Security SD card error The all delete cannot be executed even though the Data Overwrite Security Unit (B735) is installed and activated.
Causes: Defective SD card (B735). Not installed SD card (B735).
Remedy: 1. Replace the NVRAM and then install the new SD card (B735). 2. Check and reinstall the SD card (B735).
Code: 900
Description: Electric counter error Abnormal data is stored in the counters.
Causes: Defective NVRAM. Defective controller.
Remedy: 1. Turn the main switch off and on. 2. Check the connection between the
Code: 920
Description: Printer function error The error that causes the malfunction in the software application is detected.
Causes: Turn the main switch off/on, or install Printer Application firmware. Unexpected hardware structure (insufficient memory or hard disk space.)