Description: HDD Data Overwrite Security SD card error The 'all delete' function cannot be executed but the Data Overwrite Security Unit (D377) is installed and activated.
Remedy: 1. Replace the NVRAM and then install the new SD card (D362). 2. Check and reinstall the SD card (D362).
Code: 878
Description: TPM system authentication error The system firmware is not authenticated by TPM (security chip).
Causes: • Incorrect updating for the system firmware • Defective flash ROM on the controller board
Remedy: Replace the controller board.
Code: 880
Description: File format converter error The file format converter does not respond.
Causes: • Defective file format converter
Remedy: Replace the file format converter.
Code: 900
Description: Electric counter error Abnormal data in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.
Code: 910...914
Description: External Controller Error
Causes:
Remedy:
Code: 919
Description: External Controller Error 6 While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: Power outage at the EFI controller. EFI controller was rebooted. Connection to EFI controller loose