PrintCopy.info service

Ricoh G121 CL2000 AR-P1eL

Error Codes List page 1

  • Code: 201
  • Description: Polygon motor error After the main switch turns on, the polygon motor is not phase-locked in several seconds.
  • Causes: • Incorrect cable connection • Defective engine control board
  • Remedy: 1. Connect the cable correctly. 2. Replace the engine control board. 3. Replace the laser scanning unit. 4. Check or replace the cable.
  • Code: 230
  • Description: V-Sync error Subscan signals are not asserted.
  • Causes: • Incorrect cable connection • Defective engine control board
  • Remedy: 1. Connect the cable correctly. 2. Replace the engine control board. 3. Replace the laser scanning unit. 4. Check or replace the cable.
  • Code: 302
  • Description: Charge or transfer bias error Charge bias in out of the normal range.
  • Causes: • Defective PCU charge terminal • Defective transfer belt unit bias terminal • Defective terminal springs on bias terminal unit • Incorrect cable connection between high voltage supply and engine control board • Defective high voltage board
  • Remedy: 1. Replace the PCU. 2. Replace the transfer belt unit. 3. Replace the bias terminal unit. 4. Connect the cable correctly. 5. Replace the high voltage board.
  • Code: 440
  • Description: PCU BK motor error The drive motor of the black PCU is not locked.
  • Causes: • Defective gear • Defective gear on transfer belt unit • Voltage between pins 1 and 13 (CN12 on engine control board) abnormal (not +24V), or pin 11 (CN12 on engine control board) unable to send motor clock • Defective black PCU drive motor
  • Remedy: 1. Replace the black PCU. 2. Replace the transfer belt unit. 3. Replace the engine control board. 4. Replace the main drive unit assembly.
  • Code: 441
  • Description: PCU (CMY) motor error The drive motor of the CMY PCU is not locked.
  • Causes: • Defective gear • Voltage between pins 2 and 14 (CN12 on engine control board) abnormal (not +24V), or pin 12 (CN12 on engine control board) unable to send motor clock • Defective CMY PCU drive motor
  • Remedy: 1. Replace the CMY PCU. 2. Replace the engine control board. 3. Replace the main drive unit assembly.
  • Code: 471
  • Description: Belt tension unit cam error Even though the belt tension unit tries to return to its home position several times, the home position sensor is not activated.
  • Causes: • Defective transfer belt unit • Pin 3 (CN25 on engine control board) unable to send signal • Defective transfer belt tension unit
  • Remedy: 1. Replace the transfer belt unit. 2. Replace the engine control board. 3. Replace the transfer belt tension unit.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us