Description: Thermal Head Energy Pulse error The CPU detects an abnormal ID signal from the thermal head energy control pulse.
Causes: Thermal head connector Thermal head MPU
Code: E-12
Description: Pressure Plate error The pressure plate home position sensor does not turn on within 6 seconds during initialization. Both the pressure plate home position and pressure plate limit sensors turn on when the main SW is turned on. The pressure plate home position sensor does not turn off when the pressure plate limit sensor does not turn on within 4.5 seconds when compressing the ejected master.
Causes: Pressure plate drive Pressure plate motor Plate position sensors Master eject error
Code: E-13
Description: Scanner error The scanner HP sensor does not turn on after the scanner motor has moved for more than 10 seconds back to home position after scanning. The scanner cannot leave the home position within 2.0 seconds of power on. Just after switching the power on, the scanner cannot return to the home position within 2.0 seconds of leaving.
Causes: Scanner drive Scanner HP sensor Scanner motor Scanner wire has come off
Code: E-22
Description: 2nd Feed Start Timing Sensor error The 2nd feed start timing sensor does not activate before the master eject position sensor activates.
Causes: Drum sensors Feeler
Code: E-23
Description: Master Eject Position Sensor (Drum HP) error The master eject position sensor does not activate before the feed start timing sensor activates.
Causes: Drum sensors Feeler
Code: E-24
Description: Feed Start Timing Sensor error The feed start timing sensor does not activate before the 2nd feed timing sensor activates.