Description: Copy Data Security Unit error
• The copy data security board is not detected when the copy data security function is set "ON" with the initial setting. • A device check error occurs when the copy data security function is set "ON" with the initial setting.
Causes: • Incorrect installation of the copy data security board • Defective copy data security board
Code: 200
Description: Maintenance unit home position error
• The maintenance unit sensor does not get "OFF" signal after the maintenance unit motor has rotated. • The maintenance unit sensor does not get "ON" signal even the maintenance unit motor has rotated for certain time when it is assumed that the maintenance unit has to return to the home position.
Causes: • Defective maintenance unit home position sensor • Defective maintenance unit drive motor
Code: 202
Description: Tank full lever error
• The position of the tank full lever does not stay at the tank full position after ink initialization or air releasing. • The position of the tank full lever is not detected at ink suction.
Causes: • Defective tank full sensor • Tank full lever bent or broken • Incorrect ink suction
Code: 210
Description: Main scan encoder signal error
The input signal from the main scan encoder is not detected during operation of the main scan motor.
Causes: • Defective main scan encoder • Defective main scan encoder sensor • Defective main scan drive motor
Code: 211
Description: Main scan encoder error
The carriage unit does not stop at home position (rear side) or reverse position (front side).
Causes: • Defective main scan drive motor • Main scan encoder coming off • Defective main scan encoder sensor
Code: 503
Description: Tray 2 (optional paper tray unit) feed error
• The lift sensor is not activated within 18 seconds twice consecutively after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec twice consecutively.
Causes: • Defective or disconnected tray lift motor • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle • Reverse connection of harness