PrintCopy.info service

Ricoh Aficio 2032

Error Codes List page 17

  • Code: 838
  • Description: Self-diagnostic Error: Clock Generator
    A verify error occurred when setting data was read from the clock generator via the I2C bus.
  • Causes: Replace the controller board
  • Code: 840
  • Description: EEPROM error 1
    During input/output with the EEPROM, one of the following errors occurred: • A read error occurred and continued after 3 retries. • Write error occurred.
  • Causes: • EEPROM defective; replace the controller board • EEPROM has reached the end of its service life
  • Code: 841
  • Description: EEPROM error 2
    The values read from the three areas during the mirroring check phase did not match. The data is being written into the three areas differently.
  • Causes: • EEPROM defective; replace the controller board • EEPROM has reached the end of its service life
  • Code: 850
  • Description: Network I/F Abnormal
    NIB interface error.
  • Causes: • NIB defective • Controller board defective
  • Code: 851
  • Description: IEEE 1394 I/F Abnormal
  • Causes: • IEEE1384 interface board defective • Controller board defective
  • Code: 853
  • Description: Wireless LAN card error 1
    At startup the wireless LAN board could be accessed, but the wireless LAN card (IEEE 802.11b or Bluetooth) could not access the board.
  • Causes: • Wireless LAN card not inserted in the wireless LAN board when machine was switched on
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us