PrintCopy.info service

Ricoh Aficio 1224C

Error Codes List page 2

  • Code: 195
  • Description: Serial number mismatch
    Serial number stored in the memory is not correct. NOTE: Check the serial number with SP5-811-002. If the stored serial number is incorrect, contact your product specialist for details of how to solve the problem.
  • Causes: • NVRAM defective • BICU replaced without original NVRAM
  • Code: 201
  • Description: Polygon motor error
    • The polygon motor starts operating. → The lock signal is not detected within 20 seconds. • The polygon motor starts operating. → The lock signal is detected within 20 seconds. → After a 3second waiting time, no lock signal is detected within 20 seconds. • The polygon motor stops operating. → The lock signal is not detected within 20 seconds. • The polygon motor is operating. → The lock signal remains undetected for 0.5 seconds.
  • Causes: • Defective polygon motor • Defective harness
  • Code: 220
  • Description: 1st beam synchronization error
    A polygon motor lock is detected; the LD door is closed; and the LD remains on. → The LD error (1st beam synchronization error) continues for 0.5 seconds.
  • Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BICU
  • Code: 221
  • Description: 2nd beam synchronization error
    A polygon motor lock is detected; the LD door is closed; and the LD remains on. → The LD error (2nd beam synchronization error) continues for 0.5 seconds.
  • Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BICU
  • Code: 230
  • Description: FGATE on error
    A transfer belt mark is detected. → No FGATE on signal is detected within 1 second.
  • Causes: • Defective BICU
  • Code: 231
  • Description: FGATE off error
    An FGATE assert signal is detected. → The FGATE negate signal is not detected within 30 seconds.
  • Causes: • Defective BICU
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us