PrintCopy.info service

Ricoh Aficio 1022

Error Codes List page 2

  • Code: 195
  • Description: DFGATE assert error
    The DFGATE signal does not assert within 30 seconds after the original has been scanned.
  • Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
  • Code: 196
  • Description: DFGATE negate error
    The DFGATE signal does not negate within 1 minute after the DFGATE has been asserted.
  • Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
  • Code: 197
  • Description: DFGATE error
    The DFGEATE signal has already been asserted at the original scan.
  • Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
  • Code: 198
  • Description: Memory address error
    The IPU board does not receive the memory address from the controller board.
  • Causes: • Mismatched firmware between the SBCU board and controller board • Controller defective • SBCU defective • IPU board defective
  • Code: 199
  • Description: DF scanning finish error
    The original does not finish scanning with in 1 minute
  • Causes: • ADF interface cable defective • SBCU board defective • Mismatched firmware between the SBCU board and ADF
  • Code: 302
  • Description: Charge roller current leak
    A charge roller current leak signal is detected.
  • Causes: • Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us