Ricoh Aficio 1022

• Code: 986
• Description: Software write parameter setting error
  An unstable area at the storage destination in the settings table is set at NULL for the parameter received by the write module.
• Causes: Download controller firmware again

• Code: 990
• Description: Software performance error
  The software attempted to perform an unexpected operation.
• Causes: • Software defective • Internal parameter incorrect • Insufficient working memory • When this SC occurs, the file name, address, and data will be stored in NVRAM. This information can be checked by using SP7-403. Note the above data and the situation in which this SC occurs. Then report the data and conditions to your technical control center.

• Code: 991
• Description: Software continuity error
  The software attempted to perform an unexpected operation. However, unlike SC990, the object of the error is continuity of the software.
• Causes: • No operation required. This SC code does not appear on the panel, and is only logged.

• Code: 996
• Description: FCU board error
  FCU board is connected but not ready.
• Causes: • FCU board defective and requires replacement • Download FCU firmware

• Code: 997
• Description: Application function selection error
  The application selected by a key press on operation panel does not start or ends abnormally.
• Causes: • Download the firmware for the application that failed • An option required by the application (RAM, DIMM, board) is not installed

• Code: 998
• Description: Application start error
  After power on, the application does not start within 60 s. (All applications neither start nor end normally.)
• Causes: • Download controller firmware • Replace the controller board • An option required by the application (RAM, DIMM, board) is not installed