Ricoh Aficio 1013

• Code: 2001
• Description: Printer controller self-diagnostic error
  Printer controller's power-on self-diagnostic detected an error.
• Causes: • Self-diagnostic error

• Code: 2002
• Description: Printer controller: FGATE error
  Printer application returned FGATE error notification to copier.
• Causes: • FGATE error

• Code: 302
• Description: Charge roller current leak
  Current leak at the charge roller was detected.
• Causes: • Charge roller damaged • High voltage supply board defective • Poor connection of the PCU

• Code: 320
• Description: Polygon mirror motor error
  Did not detect lock signal from polygon mirror motor within 10 seconds after motor ON signal; or, lost lock signal for continuous 1.5 seconds after signal was detected.
• Causes: • Polygon mirror motor (or harness) defective • FCU defective

• Code: 322
• Description: Laser synchronization error
  Detected LD error signal for continuous 1.5 seconds while polygon mirror motor was running at constant speed.
• Causes: • Synchronization detection mirror defective • LD unit defective • FCU defective • LD harness damaged • THM not in place

• Code: 390
• Description: TD sensor error
  The TD sensor output less than 0.33 V or greater than 2.64 V ten times in succession.
• Causes: • TD sensor defective • Bad connection