PrintCopy.info service

Ricoh Aficio 1013

Error Codes List page 1

  • Code: 101
  • Description: Exposure Lamp Error
    Insufficient white level detected when scanning the white plate.
  • Causes: • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position, etc.) • Lamp stabilizer board (or connector) defective • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position
  • Code: 120
  • Description: Scanner home position error 1
    Scanner home position sensor did not detect OFF condition during initialization or copying.
  • Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached
  • Code: 121
  • Description: Scanner home position error 2
    Scanner home position sensor did not detect ON condition during initialization or copying.
  • Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached
  • Code: 122
  • Description: Scanner home position error 3
    Scanner home position sensor did not detect OFF condition during book or ADF scan operation.
  • Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached
  • Code: 123
  • Description: Scanner home position error 4
    Scanner home position sensor did not detect ON condition during book or ADF scan operation.
  • Causes: • Forgot to remove one or more of the scanner stoppers • Scanner motor defective • Scanner HP sensor (or connector) defective • FCU defective • Scanner belt loose or detached
  • Code: 192
  • Description: SBU auto-adjustment error
    During SBU auto-adjustment the detected white level was out of range.
  • Causes: • SBU auto adjustment was not done correctly • Exposure lamp defective • SBU harness defective • Bad connection • Defect in optics system (dirty scanner mirror, mirror out of position. etc.) • Defective stabilizer board (or connector) • Incorrect start position or length for white plate scanning • Scanner HP sensor out of position
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us