Remedy: RFID read device error Is the error issued again? Check the connection of the RFID R/W board. Replace the RFID R/W board. Replace the S2V PCB.
Code: 231
Display: Service call 231:Error
Description: RFID Reader I/F Error An interface error was detected with the RFID reader device. 01: communication error between the RFID reader and the engine PCB. 02: the transceiver circuit error of the RFID reader. 03: communication error between the RFID reader and the toner cartridge. 04: the toner cartridge detection error (more than 4).
Remedy: 01: Same as Error 230 02: Replace RFID R/W board. 03: Check the antenna cable connection. 04: Check to see if the quantity of toner cartridge is correct.
Code: 250
Display: Service call 250:Error
Description: Secure File Erasing Error An erasing error of an encrypted file was detected.
Remedy: An erasing error of an encrypted file was detected. Did the user agree to execute HDD ERASE? Notify the user that Disk ERASE needs to be executed to erase the encrypted file, so that the HDD is restored to the original state as at the time of purchase. ADMIN MENU HDD ERASE
Code: 251
Display: Service call 251:Error
Description: Secure Disk Erasing Error
Remedy: An error was detected during Disk ERASE. Can the error indication be reproduced? Yes Turn the power off and on again. Replace the HDD.
Code: 901, 902
Display: Power off/on 901:Error 902:Error
Description: Short or open in belt thermistor detected.
Remedy: Is belt thermistor cable setting proper? Does error reoccur? Connect cable set properly again. Turn power ON again. Replace belt thermistor.
Code: 903, 904
Display: Power off/on 903:Error 904:Error
Description: Abnormal temperature detected by belt thermistor (high temp or low temp.)
Remedy: Is belt thermistor cable setting proper? Does error reoccur? Connect cable set properly again. Turn power ON again. Replace belt thermistor and leave aside for 30 min. Then turn power ON again.