OKI ES7170MFP
Error Codes List page 2
|
|
- Code: C0A8
- Description: Fan Motor Error8
- Causes:
- Remedy: Turn off the Power of the printer and back on.
- Code: C1DA, C1DB
- Description: LCF unit detect error 1 LCF unit detect error 2
- Causes:
- Remedy: Replace the LCF Unit Board
- Code: C260
- Description: Scanner lamp error
- Causes: Lamp error – Exposure adjustment has failed
- Remedy: Power cycle the unit. If the power cycle does not work to recover from the error, the unit needs repair. The CIS may be damaged.
- Code: C270
- Description: Scanner home position error
- Causes: The home position sensor does not become inactive in the designated period of time – The carriage does not move from the home position in the designated period of time.
- Remedy: Power cycle the unit. If the power cycle does not work to recover from the error, the unit needs repair. The possible cause is the damage of the home position sensor, the belt that moves CIS, or the FB motor.
- Code: C280
- Description: Scanner home position error
- Causes: The home position sensor does not become active in the designated period of time – The carriage does not reach the home position in the designated period of time. The sensor malfunctions.
- Remedy: Power cycle the unit. If the power cycle does not work to recover from the error, the unit needs repair. The possible cause is the damage of the home position sensor, the belt that moves CIS, or the FB motor.
- Code: C291
- Description: Scan position detect error
- Causes: Scan position detect error – The black edge is not detected in scanning.
- Remedy: Power cycle the unit and retry to scan. If the error occurs again in the next scan, the unit needs repair. The calibration sheet may not be installed properly.