OKI ES1220

• Code: 035
• Display: Service call 035:Error
• Description: CU Optional RAM Spec Error CU RAM DIMM is not adjust to the specification.
• Causes: Is RAM DIMM genuin? Is RAM DIMM set properly? Is error recovered by replacing RAM DIMM?
• Remedy: Use genuine RAM DIMM. Reset RAM DIMM. Replace RAM DIMM. Replace OWL/SPA board.

• Code: 040
• Display: Service call 040:Error
• Description: CU EEPROM Error
• Causes: Does error display reappear?
• Remedy: Power OFF/ON Replace ARC/OWL/ SPA board.

• Code: 041
• Display: Service call 041:Error
• Description: CU Flash Error Flash ROM Error on the CU board.
• Causes: Does error display reappear?
• Remedy: Power OFF/ON Replace ARC/OWL/ SPA board.

• Code: 042 ... 044
• Display: Service call 042:Error ~ 044:Error
• Description: Flash File System Error
• Causes: Failed access to Flash set directly on CU board.
• Remedy: Run forced initialization of Flash.(Note that NICF/ W and Mac address is deleted. After the initialization, it is need to download NIC-F/W and/or Mac address by Maintenance utility.) In the case of before CU-F/W G1.26/X1.26, Press “+”, “-”, “CANCEL” to turn power ON. And after CU-F/W G1.27/X1.27, execute FLASH FORMAT of MAINTENANCE MENU of SYSTEM MAINTENANCE MENU. Release buttons when [FLASH FORMAT] appears, wait until [ONLINE] (2min) and Replace ARC/OWL/ SPA board if symptom does not change.

• Code: 051
• Display: Service call 051:Error
• Description: CU Fan Error Abnormal CPU cooling fan on CU board.
• Causes: Is CU Fan connector set properly? Is error recovered by replacing fan?
• Remedy: Connect properly. Replace fan. Replace OWL/SPA board.

• Code: 070
• Display: Power off/on 070:Error
• Description: PSE firmware fault detected.
• Causes: Does error reoccur?
• Remedy: Power OFF/ON. Replace OWL/SPA board.