PrintCopy.info service

OKI C5200n

Error Codes List page 2

  • Code: -07
  • Display: OPECODE TRAP ERR
  • Description: PU firmware went haywire.
  • Causes: Does error reoccur?
  • Remedy: Turn on the printer again. Replace the PU board (PRN).
  • Code: -08
  • Display: BRK INST EXECUTE
  • Description: PU firmware went haywire.
  • Causes: Does error reoccur?
  • Remedy: Turn on the printer again. Replace the PU board (PRN).
  • Code: -09
  • Display: WDT ERROR
  • Description: PU firmware went haywire.
  • Causes: Does error reoccur?
  • Remedy: Turn on the printer again. Replace the PU board (PRN).
  • Code: -10
  • Display: COMMUNICATION ERROR
  • Description: An error in a PUCU interface.
  • Causes: Is the CU assy installed properly? Does the printer recover from the error by replacing the ARC/ SPY/SPA board.
  • Remedy: Reinstall the assy properly. Replace the ARC/SPY/ SPA board. Replace the PU board (PRN).
  • Code: 001
  • Display: Service call 001:Error(C5400)
  • Description: Machine Check Exception Hardware fault detected. (Board defectiveness or Shortage of power supply volume)
  • Causes:
  • Remedy: Replace SPA board.
  • Code: 002 ... 007
  • Display: Power off/on 002:Error ~ 006:Error 007:Error(C5400)
  • Description: CPU Exception
  • Causes: Does error display reappear?
  • Remedy: Power OFF/ON Replace ARC/SPA board.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us