Remedy: Does error reoccur? Turn power ON again. Add option RAM DIMM.
Code: 200, 202
Display: Service call 200:Error ~ 202:Error
Description: PU Firmware download Error.
Remedy: Error occurered while writing over the PU firmware. Turn the printer OFF/ ON, and retry to download the PU firmware again. (Usually, the procedure (PU firmware download) which isn’t done, so this is not occur.)
Description: An error was detected of the CU program. (203~214 is not occure in usual operating.)
Remedy: Reinstall the CU board. Is the error message displayed again? After turn power OFF, check connections between CU board and PU board. Then turn power ON again.
Code: 209
Display: Power off/on 209:Download Error
Description: Media Table download Error. Downloading Media Table to PU has failure.(Related to Custom Media Type)
Remedy: Downloading Media Table to PU has failure.(Related to Custom Media Type) Turn the printer OFF/ ON, and retry to download the PU firmware, again. (Usually, the procedure isn’t done, so this is not occur.)
Code: 220
Display: Service call 220:Error
Description: False setting of a record medium detected by a print statistics.
Remedy: Take off the HDD or replaced? Reset original HDD.
Code: 901, 902
Display: Power off/on 901:Error 902:Error
Description: Short or open in belt thermistor detected.
Remedy: Is belt thermistor cable setting proper? Does error reoccur? Connect cable set properly again. Turn power ON again. Replace belt thermistor.