Description: RAM Spec Error Unsupported DIMM specification of the CU RAM
Remedy: Is a genuine RAM DIMM in use? Is the RAM DIMM installed properly? Is the fault recovered when the RAM DIMM is replaced? Use genuine RAM DIMM. Reset RAM DIMM. Replace RAM DIMM. Replace TB3 board
Code: 040
Display: Service call 040: Error
Description: CU EEPROM Error
Remedy: Is the error message displayed again? Power supply OFF/ON Replace TB3 board
Code: 042, 043, 045
Display: Service call 042: Error 043: Error
Description: Flash File System Error It failed to the access to CU Flash ROM that is attached to the BLA board directly.
Remedy: Replace TB3 board
Code: 052
Display: Power off/on 052:Error
Description: DMA Abort Error detected in Image processor.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.
Code: 070
Display: Power off/on 070:Error
Description: PSE firmware fault detected.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.
Code: 072
Display: Service call 072: Error
Description: Engine I/F Error I/F Error between PU and CU