Description: Low-voltage power supply FAN error. Low-voltage power supply temperature error.
Remedy: Is the FAN (bottom right of the front) of the low voltage power supply block working? Is the FAN connector connected correctly? Check connections for connector of the FAN. Replace the lowvoltage power supply. Replace the FAN. Replace the lowvoltage power supply.
Remedy: Does error reoccur? Yes Power Off/On. Replace the control panel board (PCQ board).
Code: 124
Description: Abnormal environment temperature.
Remedy: Does error reoccur? Yes Power Off/On. Replace the control panel board (PCQ board).
Code: 126
Description: Condensation in the printer was detected.
Remedy: Condensation iss likely to occur in printers carried from the outside. Turn on the printer again after it is exposed to room temperature for two hours to half a day. Does the error reoccur? Yes After leaving the printer at room temperature, turn on the power again. Replace the control panel board (PCQ board).
Code: 127
Description: Error detected at the fuser unit cooling FAN.
Remedy: Is the FAN connector connected properly? Does error reoccur? Connect properly again. Replace the FAN motor. Replace the PU/ CU board
Code: 128
Description: Error detected at the engine FAN motors. 05: Fuser side FAN 08: REAR FAN 0B: ID FAN 2
Remedy: Is the FAN connector connected properly? Does error reoccur? Connect properly again. Replace the FAN motor. Replace the PU/ CU board.