Display: [*]No cartridge *Ink color is displayed in the [*].
Description: Ink cartridge is not inserted.
Remedy: 1. Are Ink cartridges used dedicated ink cartridges? Instruct the user to use the dedicated ink cartridges. 2. Is the message displayed after turning off the printer and turning it back on? When the message is displayed: Refer to the check item 3 for action. 3. Check if there are ink cartridges in the selfdiagnosis function to see if the ink cartridge displayed is the same one with the error. Insert or remove the cartridge and wait for more than three minutes to see if the same error is still displayed. • If the same error continues to be displayed, adjust the mounting position of I/C cable. 4. Check the connection of the connector of I/C cable. Make sure to connect it securely. 5. Check the connection of JUNC_ID cable. Make sure to connect it securely. 6. Check the connection of JUNC_FFC. Make sure to connect it securely. 7. At the connection point of the ink tubes, ink leakage, or bleeding did not occur? Check the connection of Ink tube. 8. I/C cable may be damaged. Replace I/C cable. 9. JUNC_ID cable may be damaged. Replace JUNC_ID cable. 10. JUNC_FFC may be damaged. Replace JUNC_FFC. 11. Ink ID board Assy may be damaged. Replace Ink ID board. 12. MAIN board may be damaged. Replace MAIN board.
Description: A dedicated S/C card may be malfunction.
Remedy: 1. Check if the message is displayed after turning off the printer and turning it back on. When the message is displayed: Refer to the check item 2. 2. Check if the dedicated Smart chip cards are used. 3. Check if the dedicated Smart chip cards are broken or the chip portion is damaged. Replace with the dedicated Smart chip cards. 4. Check if ink ID is correctly recognized in the self-diagnosis function.
Code: n11
Display: Full wasteInkTank
Description: Waste fluid bottle is full
Remedy: 1. Check if Waste fluid bottle is full. Dispose of waste fluid. 2. Check the connection of the connector of Waste fluid level switch. Re-insert the connector of the waste liquid level switch. 3. Waste fluid level switch may be damaged. 4. Check JUNCTION board . Replace Waste fluid level switch. If the same error continues to be displayed after replacing Waste fluid level switch: JUNCTION board may be damaged. Replace it.
Code: n12
Display: Life Times [Head]
Description: The operational life of Print head has almost expired.
Remedy: Check the life counter in Maintenance mode 2. Replace Print Head as necessary. Clear the counter after replacing it.
Code: n13
Display: Life Times [Pump]
Description: The operational life of Pump has almost expired.
Remedy: Check the life counter in Maintenance mode 2. Replace Pump as necessary. Clear the counter after replacing it.
Code: n14
Display: Life Times [CR Motor]
Description: The operational life of CR motor has almost expired.
Remedy: Check the life counter in Maintenance mode 2. Replace CR motor as necessary. Clear the counter after replacing it.