PrintCopy.info service

Mimaki JV4-160

Error Codes List page 2

  • Code: 08
  • Display: ERROR08 Linear Encoder n
  • Description: • The Linear encoder is in abnormal conditions.
  • Remedy: 1) Replace the Linear encoder with a new one. 2) Replace the main PCB with a new one.
  • Code: 09
  • Display: ERROR09 HDC
  • Description: • Configuration of PDC/IOC has not been successfully carried out. • Configuration of HDC has not been successfully carried out.
  • Remedy: 1) Replace the main PCB with a new one. 2) Replace the HDC PCB with a new one.
  • Code: 10
  • Display: ERROR10 COMMAND
  • Description: • Command code other than MRL has been received.
  • Remedy: 1) Check the data received through HEX dump. 2) If error occurs at 1394 a. Check Time out of the transfer tool (RIP). b. Replace the I/F connection board with [E102154A] or later. c. Replace the 1394 board with a new one. d. Replace the main PCB with a new one.
  • Code: 11
  • Display: ERROR11 PARAMETER
  • Description: • Parameter that has not defined in MRL has been received.
  • Remedy: 1) Check the data received through HEX dump. 2) If error occurs at 1394 a. Check Time out of the transfer tool (RIP). b. Replace the I/F connection board with [E102154A] or later. c. Replace the 1394 board with a new one. d. Replace the main PCB with a new one.
  • Code: 12
  • Display: ERROR12 Ment Command
  • Description: • A command error for manufacture of has occurred .
  • Remedy: 1) It is not used in the field.
  • Code: 20
  • Display: ERROR20 I/F BOARD
  • Description: • A error occurred in communication between the main PCB and the interface board.
  • Remedy: 1) Replace the I/F PCB with a new one. 2) Replace the main PCB with a new one. 3) Replace the I/F connection board with a new one.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us