Description: An error occurs on the control PCB (FPGA PDC)
Remedy: Turn off the main power, and turn it on a little later. If the error occurs again, carry out the followings. 1. Replace the main PCB assy.
Code: 09
Display: ERROR 09 HDC ERROR (----)
Description: An error occurs on the control PCB (FPGA HDC)
Remedy: Turn off the main power, and turn it on a little later. If the error occurs again, carry out the followings. 1. Replace the main PCB assy.
Code: 10
Display: ERROR 10 COMMAND ERROR
Description: Other data than commands is received.
Remedy: 1. Change over the setting of [COMMON SETTING] -> [RECEIVED DATA], depending on the application being used. 2. Clear the data of uncompleted printing. 3. Check the USB cable. (specifications, cable length, etc.) 4. Replace the main PCB assy.
Code: 11
Display: ERROR 11 PARAMETER ERROR
Description: Parameter out of the numeral value range is received.
Remedy: Turn off the main power, and turn it on a little later. If the error occurs again, carry out the followings. 1. Clear the data of uncompleted printing. 2. Check the USB cable. (specifications, cable length, etc.) 3. Replace the main PCB assy.
Code: 12
Display: ERROR 12 MAINTENANCE COMMAND
Description: Other data than commands is received.
Remedy: Turn off the main power, and turn it on a little later. If the error occurs again, carry out the followings. 1. Clear the data of uncompleted printing. 2. Check the USB cable. (specifications, cable length, etc.) CB assy.
Code: 12
Display: ERROR 12-C DEVICE
Description: Inappropriate instruction was given concerning the printer controlling.
Remedy: Modify the instruction and send the data again, or send the data after restarting the printer. If the abnormality occurs again, carry out the followings. 1. Clear the data of uncompleted printing. 2. Check the USB cable. (specifications, cable length, etc.) 3. Replace the main PCB assy.