Causes: An auto-cut instruction was received, or, auto-cut has been enabled and auto-cut was activated at the auto-cut timing. Manual-cut operation was performed with the jog keys.
Remedy: This is not an error, so no action is needed. This is not an error, so no action is needed.
Code: n20
Display: * * DIVISION * *
Description: Displayed during partitioned cutting
Causes: Cutting according to partitioned cutting data is in progress.
Remedy: This is not an error, so no action is needed.
Code: n21
Display: * DIVISION * XXs
Description: Waiting for data in Division Cut Mode
Causes: The machine is waiting for data from the host computer after executing the “DIVISION” function. XXs: After the count is 0s frame and mark will be cut and the machine will be local mode. Exchange sheet and continue division.
Remedy: This is not an error, so no action is needed The user should continue with the copy cut operation as instructed in the Operation Manual.
Code: n22
Display: RS1 CSx DRx ERx CDx
Description: Displayed during handshake test
Causes: The signal lines of the RS-232C are indicating while “LOOP BACK test is being executed.”
Remedy: This is not an error, so no action is needed.
Code: n23
Display: * TRANS. * XXXXXXB
Description: Displayed during buffer dump transfer
Causes: This message appears when transferring data to the host PC while BUFFER DUMP maintenance is in progress.
Remedy: This is not an error, so no action is needed.
Code: n24
Display: * TRANSMIT END *
Description: End of buffer dump transfer
Causes: This message appears when data transfer to the host PC is completed under BUFFER DUMP maintenance.
Remedy: This is not an error, so no action is needed. Press any key to revert to Local Mode.