Causes: The printer has performed more than 100 "shift and re-flash" operations as a result of Error Correction Code bit corrections. It is an indication that the NAND on the RIP board is failing. Replace the RIP board.
Code: 959
Description: NAND Failure
Causes: A SRAM failure on the RIP board. Replace the RIP board.
Code: 960
Description: Memory Error
Causes: The RAM soldered on the RIP board is bad. Replace the RIP board.
Code: 961
Description: Memory Error
Causes: The RAM in slot 1 on the RIP board is bad. Replace the failing RAM card.
Code: 962
Description: Memory Error
Causes: The RAM in slot 2 on the RIP board is bad. Replace the failing RAM card.
Code: 964
Description: Emulation Error
Causes: A failure within the download emulation CRC which is programmed into the RIP board. To resolve the problem, a servicer may disable the download emulation by entering the Configuration Menu and set the Download Emulation to "Disabled." The download emulation may be reinstalled at that point. If the problem persists, the download emulator may be faulty and should be replaced.