PrintCopy.info service

Lexmark CS510

Error Codes List page 4

  • Code: 964.xx
  • Description: Service Emulation Error Download emulation cyclic redundancy check (CRC) failure has occurred. A checksum failure detected in the emulation header or emulation file.
  • Remedy: The following actions may be taken: 1 Disable the Download Emulation. 2 Program the download emulation into the code overlay SIMM again. 3 If the problem is not resolved replace the code overlay SIMM, and download emulation again.
  • Code: 975.xx
  • Description: 975.xx Service Standard Network or 975.xx Service Network Card x Network error: unrecognizable network port.
  • Remedy: Replace the standard network card or the card in the specified slot.
  • Code: 976.xx
  • Description: 976.xx Service Standard Network or 976.xx Service Network Card x Unrecoverable software or error in network or network card x.
  • Remedy: If unable to clear the error message, then check the following: • If installed, then check network card for correct installation. • If correctly installed, then replace the network card. • If a network card is not installed, then replace the controller board.
  • Code: 978.xx
  • Description: 978.xx Service Standard Network or 978.xx Service Network Card x Bad checksum while programming Standard Network or Network Card x port.
  • Remedy: Check the following: • Make sure you have downloaded the code in binary mode, not ASCII. • Reprogram the Network card. • If the problem persists, and if installed, then check the network card for correct installation. • If correctly installed, then replace the network card. • If a network card is not installed, then replace the controller board.
  • Code: 979.xx
  • Description: 979.xx Service Standard Network or 979.xx Service Network Card x Flash parts failed while programming the Standard Network or Network Card x port.
  • Remedy: Check the following: • If installed, then check the network card for correct installation. • If correctly installed, then replace the network card. • If a network card is not installed, then replace the controller board
  • Code: 982.xx
  • Description: Service <device> Comm. Communications error detected by the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3
  • Remedy: Call next level of support.
  • Code: 990.xx
  • Description: Service <device> This error message indicates that an equipment check condition has occurred in the specified device. Note: <device> can be one of the following: • Tray 2 • Tray 3
  • Remedy: Go to the service check for the device indicated.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us